Hardfacing amd Joining Electrodes

Weld Rod and Wire

Weld rod and wire are available for field use.  Installation gaps can be filled and high wear areas can be built up or repaired.  A variety of alloy combinations are available.

SA1750CR

This is good for low to medium impact hardfacing to counteract extremely severe abrasive operating conditions.  Good corrosion resistance and goof for high temp abrasion resistant up to 1100 F°.

SA1750CROP

This is an extra high carbon chromium carbide overlay designed for abrasion and abrasion with mild impact for hard to reach and out of position build-up.  Multiple layers provide hardness of 55-62 HRc.

SA100NMC

Good for wear and corrosion resistant build-ups for welds joining dissimilar steels that are difficult to weld such as austenitic manganese steel.  Used for buffer layers in hardfacing.

SA550MN

Extreme resistance to hot cracking where contraction strain cannot be relieved for joining and building up parts subject to extreme shock, impact, and abrasion.  Use flux cored wire for build-ups on austenitic manganese steel parts subject to heavy pressure and impact wear.